How to Repair Washing Machine
    The articles provides you some tips .But if you want to get more information about Washing Machine repairment,I suggest that you should go for the repairman for help.
     If the washing machine is not at all working, ensure that proper power is being supplied to it. Also check if its door is closed in the correct manner. Make sure that the control knob is pulled out, and the on/off button is switched on. If this solves the problem, try some other functions, which will determine its proper working. If the machine is not working, but is making a kind of humming sound, make sure the hot/cold water supply is turned on.
    If the washer doesn’t spin, the primary things you need to check is the hoses and the belt. Check if there is a click sound from the lid switch when closing the machine. If there is no such sound, then most likely the switch is at fault and needs to be replaced. There can also be chances of the spin solenoid not operating, or a raddled drive coupling.
    If there is a problem of the washer not filling properly or filling tardily, check if the hoses are twisted or choked. If the hoses are working fine, then there is a possibility of a problem in the valve which then needs replacement. If the machine fills and drains simultaneously, the draining pipe is not installed in a correct manner, which is leading to siphoning.
    If the water is leaking onto the ground; examine the water supply connections, drain pipe, water pump, tub for any cracks or leaks, and also scrutinize the tub seal and bearing. If the machine makes a particular noise or vibrates while operating; balance the load, check if there is any obstruction in the water pump, examine the coupling and transmission, check if the tension of the drive belt is appropriate, and also inspect the motor bearings.
July 9, 2009
Tags: Repairment Posted in: Washing Machine
Leave a Reply
You must be logged in to post a comment.